> PitBoss Cellular Flood Alarm System

PitBoss Cellular Flood Alarm System

PumpAlarm PitBoss | Our#: 178160



PitBoss Cellular Flood Alarm System

Great for sump pits, drains, water pans, and under appliances such as refrigerators, water heaters, and air conditioning units - the PitBoss detects potential flooding events and sends a text message to your mobile device!  PitBoss is the only choice for keeping your home protected from costly damage.


  • No computer, home network or phone line needed
  • Easily set up text message notifications on up to 3 phones
  • Receive a tex message when water level in your sump pit is too high or when you lose power to your home
  • Sounds loud alarm along with your text message notification
  • Lose power?  No problem.  Unlike phone dialers and Wifi connected devices, PitBoss cellular technology and battery backup allow you to receive tex message notification when the power is out!
  • Notifies you via text message if backup batteries need replacement
  • Works side-by-side with battery backup systems

Strap PitBoss to the discharge pipe above your sump pit (straps included)
Plug sensor(s) into PitBoss
Secure the sensor about 6 inches below the top of the sump pit (PitBoss comes with 2 sensors - so the other sensor can be dropped anywhere else where you want to know about leaks, floods, or standing water)
Power on PitBoss and wait for cellular service
Program PitBoss to send text messages to your mobile phone (up to 3 phones)
Receive text message notifications for high water and power outages
Note: Costs $15 to activate product.  After first year - cost to renew cellular service for device is $30 annually.

PitBoss System Includes:
1- PitBoss Cellular Pump Alarm
1- AC Power Adapter
1- Digital Water Sensor (15' lead length)
1- Digital Float Switch (15' lead length)
6- Mounting Straps
1- Quick Start Installation Guide
1- 2 yr. Warranty Registration Card
1- Annual subscription to notification service ($30 Value)

Weight: 6.4oz
Height: 5.5 in
Width: 3.5 in
Operating Temperature: 32 degrees F to 150 degrees F
Operating Humidity: 0-90% RH, non-condensing
Cellular Radio: CDMA Dual Band 1xRTT (CDMA2000) 800/1900
Certifications: FCC Parts 15, 22, 24; RoHS compliant; IC: RSS-132 & 133
Antenna: Integrated, on board
Input Voltage: 12 VDC +/- 10%
Input Current: 0.5 A (max)
Backup Batteries: Non-rechargeable, AAA size, Requires 4 batteries
Sounder: 2.9 kHz +/- 500 Hz, 100 dBA on 12 VDC, 75 dBA (estimated) on backup batteries
Sensor Inputs: (2) Conductivity sensing or contact closure. Safe to touch
Sensors: (1) Conductivity sensors with 304SS electrodes; (1) Reed switch contact closure sensor;
Control Switches: (1) on/off power switch, disconnects AC Power and battery pack; (1) push to test
momentary button
Enclosure: NEMA 1 for indoor,basement,or crawlspace. Not recommended for outdoor use
Protection: US Patents #7,228,129 B1, #7,778,633 B2, and #8,060,078 B2